Caution: Precautions for LED strip lights

Release time: 2023.12.18
1. Forbidden to bring power operations
The lamp belt is welded on the flexible circuit board with a special processing process. After the product installation is completed, it is powered on and lights up. It is mainly used as a decorative lighting application. The common types are 12V and 24V low -voltage lamp bands. To avoid damage to the lamp belt due to errors during the installation operation, the light belt products are strictly prohibited.
2. Storage requirements for light bands
The silicone with LED lamps has a moisture absorption characteristics. The lamp belt should be stored in a dry and sealing environment. It is recommended that the storage period should not be too long. Please use or re -seal it in time after demolition. Do not seal before use.
3. Check the product before power -on
The entire roll lamp belt does not disassemble the circle, packaging or piled into a ball, and do not electricity to light the light band to avoid severe thermal heat and cause LED to fail.
4. It is strictly forbidden to press the LED light
The lamp belt is welded on the copper wire or a flexible circuit board. When the product is installed, it is recommended not to press the LED surface directly with your fingers or hard objects. Set on the LED light to avoid damaging the lamp belt LED light, causing the lamp bead Damage to the dead lamp